24 Chapter 24: Risk Assessment and the Use of Personal Protective Equipment

Risk Assessment for Non-Sterile Compounding

To ensure the quality of compounded products and protect personnel, a risk assessment must be performed for each non-sterile preparation. This assessment helps ensure appropriate safety measures, including PPE, are selected and applied.

Risk assessment evaluates:

• Properties of the active pharmaceutical ingredient (API)
  (e.g., toxicity, irritant properties, carcinogenicity, reproductive toxicity)
• Dosage form and route of administration
  (e.g., topical, oral, mucosal)
• Concentration of hazardous substances
• Potential for personnel exposure
  (e.g., inhalation, skin contact, ingestion)
• Complexity of compounding process
  (e.g., need for special manipulations, open handling
• Frequency and volume of compounding
• Exposure risk to staff and cumulative exposure over time
• Risk of cross-contamination (e.g., allergens)
• WHMIS classification or NIOSH hazardous drug classification
• Microbial contamination risk (especially in creams, ointments, liquids)
• Education and competency of compounding staff
• Adequacy of equipment and facilities

Risk levels (NAPRA Classification):

• Simple: Routine procedures with little risk (e.g., reconstituting powders with water).
• Moderate: Requires special calculations or techniques (e.g., topical creams, suspensions).
• Complex: Requires specialized training, facilities, or equipment (e.g., hormone, chemotherapy drug preparations).

Outcome of the risk assessment determines:

• Necessary PPE
• Facility requirements (e.g., use of containment primary engineering controls, C-PECs)
• Handling, storage, and disposal procedures

In addition to evaluating individual preparations, the overall or cumulative risk of all compounded products in the pharmacy must be considered. For example, while a single low-risk preparation may not require extensive measures, multiple low-risk products compounded in a short period may increase overall risk. These scenarios must be documented and addressed appropriately.

If the pharmacy must compound a product that involves procedures not currently in place, a risk mitigation plan must be documented. This includes identifying potential hazards, listing extra precautions (e.g., workflow controls, verification steps, or containment strategies), and citing evidence-based references supporting the effectiveness of those measures.

Examples:

• For a complex compound, specify extra requirements such as uninterrupted workflow, specialized equipment, additional checks, and supporting documentation.
• If handling hazardous substances, ensure alternative containment or safe handling practices are documented in the Master Formulation Record and that applicable safety data sheets and references are consulted.

Each pharmacy must maintain an updated list of drugs and materials used, including those classified as hazardous. All relevant federal, provincial, and territorial regulations must be reviewed to determine appropriate compounding practices.

Definition of a complex compound:

A complex compound in non-sterile compounding refers to a preparation that requires specialized knowledge, skills, equipment, or procedures beyond basic compounding techniques. These compounds often involve multiple ingredients, critical calculations, or unique administration routes, and pose higher risks if compounded incorrectly.

Key Characteristics of a Complex Compound:

• Involves multiple steps that must be precisely followed
• Requires special equipment (e.g., ointment mills, pH meters, capsule machines)
• Includes unstable or reactive ingredients
• Demands tight control of environmental conditions (e.g., temperature, humidity)
• Requires modification of dosage forms (e.g., crushing tablets, suspending powders)
• Often intended for non-standard routes of administration (e.g., rectal, vaginal, nasal)
• Requires advanced calculations for dosing or ingredient conversion
• May involve non-routine procedures, such as emulsification or sustained-release preparations

Examples:

• Transdermal gels containing hormones
• Oral suspensions for pediatric patients using modified ingredients
• Rectal suppositories that require melting and molding
• Customized topical creams with multiple APIs (active pharmaceutical ingredients)
• Nasal sprays with strict particle size requirements

Risk assessments must be reviewed annually and updated as needed.

Note: Even if hazardous compounds are used only occasionally, they must not be considered in isolation. The aggregate risk across all preparations should be evaluated and documented.

Risk Assessment Decision Tool

A decision algorithm is available to guide pharmacists in determining the appropriate risk level and facility requirements for non-sterile compounding. This algorithm considers the drug’s classification (e.g., NIOSH Tables 1–3, WHMIS), reproductive risks, and compounding complexity.

NAPRA’s guidance document has a good one…4.2- can we add here?

Resources for Risk Assessment

Refer to the following sources for guidance on assessing risk and determining safe compounding practices:

• USP Compounding Compendium (USP <795>, <800>)
• CSHP Guidelines for Pharmacies
• PIC/S Good Compounding Practices
• NIOSH List of Hazardous Drugs
• Hazardous Products Act & WHMIS 2015
• WorkSafeBC Guidelines on Hazardous Drug Handling
• ASSTSAS Safe Handling of Hazardous Drugs Guide

These resources help ensure that pharmacy staff apply appropriate safety measures and follow current standards when handling hazardous or complex compounds.

The risk assessment is used to determine the NAPRA requirements for non-sterile compounding.  The requirements are in divided into 3 levels, A, B and C.

What Personal Protective Equipment (PPE) should be used?

Purpose of PPE

PPE is essential in non-sterile compounding to:

• Protect compounders from hazardous or irritating substances
• Protect the preparation from contamination
• Comply with NAPRA standards

How to Determine Appropriate PPE for Non-Sterile Compounding:

1. Assess the Type of Ingredients

• • Irritants or sensitizers → Gloves, mask/respirator, lab coat
  • Hazardous drugs (e.g., hormones, chemotherapeutics) → Full PPE – Double gloves, gown, respirator or N95, full-face shield
  • Allergenic ingredients (e.g., penicillin) → Same as above, plus enhanced containment

2. Evaluate the Dosage Form and Process

• • Liquids & solutions → Lab coat, gloves, splash goggles
  • Powders (prone to aerosolization) → Respirator or mask, gloves, eye protection
  • Semi-solids (creams, ointments) → Lab coat, gloves
  • Capsules or suppositories → Gloves, lab coat; mask if powders are involved

3. Consider the Route of Administration

• • Dermal or mucosal preparations often require more PPE to prevent self-exposure due to increased risk of absorption (e.g., hormone creams)

4. Follow Risk Level Classification

• • Simple preparations → Basic PPE (gloves, lab coat)
  • Moderate/Complex or → Enhanced PPE (double gloves, gown, respirator, eye protection)
  • Hazardous preparations → Full NAPRA-compliant PPE (see below)

NAPRA 9.2.3: PPE Requirements for Hazardous Non-Sterile Compounding

Gloves

• • Double gloves (ASTM D6978) for:
    • Unpacking
    • Compounding
    • Deactivation/decontamination
    • Spill management
  • Worn over gown cuffs
  • Change:
    • Every 30 minutes
    • If damaged or contaminated
    • At manufacturer’s permeation limit

 Gown

• • Disposable, back-closing, long sleeves with fitted cuffs
  • Materials: Polyethylene-coated polypropylene or similar
  • Do not use: Cloth, absorbent material, or reusable lab coats
  • Change:
    • Every 2–3 hours
    • If removed
    • If contaminated
    • At permeation time limit

⚠️ Never take contaminated clothing home. If policy allows laundering, it must follow strict protocols.

Head, Hair, Shoe & Sleeve Covers

• • Disposable covers required for:
    • Hair, beard/mustache, shoes
  • Sleeve covers for additional protection
  • Change:
    • After each removal
    • If contaminated
  • Double shoe covers:
    • Wear second pair inside the C-SEC
    • Remove when exiting

 Respiratory Protection

• • Surgical masks are not sufficient for hazardous drug protection
  • Use:
    • N95 or N100 masks (fit-tested) for airborne particles
    • Full face-piece respirator or PAPR for vapors/gases or splash risk
  • Change:
    • Every 3.5 hours
    • After removal
    • If contaminated

Eye & Face Protection

• • Use goggles + face shield or full-face respirator when:
    • Working at or above eye level
    • Cleaning under C-PEC surfaces
    • Managing spills
    • Unpacking damaged products
  • Regular eyeglasses and safety glasses are not enough

5. Check Organizational Policies & SDS

• • Always review the Safety Data Sheets (SDS) for each ingredient for PPE recommendations
  • Follow institutional protocols and local/regional regulations

Common PPE for Non-Sterile Compounding: **would like this as a side box but couldn’t get the format right

PPE Item            Use Case

Gloves Always required — nitrile preferred over latex

Lab Coat/Gown             Protects clothing/skin — use disposable for hazardous

Eye Protection               When splashes or aerosols are likely

Mask/Respirator          For airborne powders or hazardous vapours

Hair & Beard Covers    For cleanliness and contamination control

PPE decision chart:

NAPRA recommends replacing PPE:

Item                                                     Replace When…

Gloves                                                  Every 30 min
If torn or contaminated
Gown                                                   Every 2–3 hours
If removed or contaminated
Respirator mask                                 Every 3.5 hours
After removal or contamination
Head/hair/shoe covers                      After removal
If contaminated